Keunggulan Teknis Kritis
-
Vanstone Mechanical Integrity: Because there is no weld between the flange and the thermowell stem, the TT511 eliminates the risk of weld-joint failure due to stress corrosion or vibration. The sealing is achieved by the compression of the integral collar, providing a robust metal-to-metal or gasketed interface.
-
Outstanding Cost Effectiveness: The Vanstone design allows the lap-joint flange to be reused even if the thermowell stem needs replacement. Additionally, since the flange does not come into contact with the process media, it can be manufactured from standard carbon steel while the wetted thermowell stem is made from expensive, corrosion-resistant alloys.
-
Full Shell Specification Compliance: The TT511 is engineered to meet the rigorous requirements of Shell specifications S.38.113 (rev.D) and S.38.114 (rev.D), ensuring it meets the highest safety and quality standards for global energy projects.
-
Precision Stress Calculation: Every TT511 can be verified with an exact wake frequency and stress calculation (per ASME PTC 19.3 TW). This ensures that the thermowell geometry can withstand the specific flow velocities and pressures of your process without mechanical resonance or fatigue.
-
Flexible Geometry: Machined from solid barstock, the TT511 offers a wide variety of tip forms—including straight, tapered, or stepped—allowing for the optimal balance between rapid thermal response and mechanical strength.
-
Simplified Logistics: Because the flanges are separate components, plants can maintain a smaller inventory of spare parts. Standardized flanges can be stocked and paired with various thermowell stems as needed.
Matriks Kinerja Teknis
| Fitur | Detail |
| Konstruksi | Solid barstock (drilled and machined) |
| Process Design | Vanstone (Collar with lap-joint flange) |
| Standar | Shell S.38.113/114, ASME B40.9 |
| Material Savings | Allows use of cheaper flange materials (non-wetted) |
| Tip Geometry | Straight, Tapered, or Stepped |
| Safety Verification | ASME PTC 19.3 TW wake frequency calculations |
| Pemeliharaan | Reusable flange; simple stem replacement |
Aplikasi Utama
-
High-Pressure Petrochemical Loops: Where the elimination of process-wetted welds is required to prevent stress-corrosion cracking in hydrogen or hydrocarbon service.
-
Oil & Gas Refineries: Applications in distillation and cracking units where exotic alloys (like Monel or Hastelloy) are required for the stem but would be cost-prohibitive for a full-welded flange.
-
Aggressive Chemical Media: Processes where frequent inspection of the thermowell is necessary; the Vanstone design simplifies removal and re-installation.
-
Offshore Platforms: Reliable temperature measurement in space-constrained, high-vibration environments where mechanical failure must be avoided.
-
Standardized Global Projects: Large-scale EPC (Engineering, Procurement, and Construction) projects following Shell-standard mechanical specifications.
