Muhim texnik afzalliklar
-
Wet Gas Robust Design: Unlike standard ultrasonic meters that may fail when liquids are present, the DRU-S features a “wet gas robust” architecture. It utilizes high-performance titanium sensors that are resistant to the corrosive and erosive effects of produced water and hydrocarbons, ensuring continuous operation in non-dehydrated gas streams.
-
Liquid Indication Diagnostic: A standout feature of the DRU-S is its unique ability to detect the presence of liquids in the gas stream. This diagnostic capability provides operators with real-time insight into process upsets or changes in well behavior, allowing for better management of separators and dehydration units.
-
Extreme Turndown (≥ 100:1): In gas production, flow rates can fluctuate wildly as a well ages or during different production cycles. The DRU-S covers a range that would typically require changing multiple orifice plates, reducing manual labor and the risk of measurement gaps.
-
Zero Pressure Drop: The full-bore design ensures that there is no restriction to the gas flow. This is critical for low-pressure wells where every millibar of pressure counts toward maintaining production and preventing the well from loading up with liquids.
-
Atmospheric Pressure Operation: While many high-pressure ultrasonic meters struggle at low pressures, the DRU-S is capable of measuring from atmospheric pressure up to the full rating of the pipeline, providing flexibility across the entire lifecycle of a gas well.
-
Remote Monitoring & Plug & Play: The device connects seamlessly to the SICK Monitoring Box. This enables remote diagnostics and condition-based maintenance, allowing engineers to verify meter health from the office and eliminate unnecessary site visits to remote well pads.
Batafsil texnik ishlash matritsasi
| Texnik xususiyatlar | Texnik tafsilotlar va diapazonlar |
| O'lchangan o'zgaruvchilar | Gas velocity, gas volume, sound velocity, liquid indication |
| O'lchov oralig'i | ≥ 100 : 1 |
| Nominal quvur o'lchamlari | DN50 to DN200 (2″ to 8″) |
| Maksimal ish bosimi | Up to 250 bar (ASME 1500) |
| Gaz harorati | -40 °C to +180 °C |
| Aniqlik | Typically ±1.0% (uncalibrated) to ±0.5% (calibrated) |
| Sensor materiali | High-grade Titanium |
| Ulanish | Modbus (RTU/TCP), Monitoring Box ready |
Asosiy ilovalar
-
Wellhead Measurement: Tracking the production of individual gas wells where raw, wet gas is the norm.
-
Gas-Lift Optimization: Measuring the high-pressure gas injected into oil wells to ensure optimal lift efficiency.
-
Associated Gas Monitoring: Accurate tracking of the gas produced alongside oil in separators.
-
Vapor Recovery Units (VRU): Monitoring the flow of low-pressure gases captured from storage tanks or treaters.
-
Inlet Measurement: Providing flow data for raw gas entering dehydration or gas treatment plants.
