Technical Characteristics and Sanitary Design
-
Hygienic and Robust Construction: Unlike standard sensors, the FDU91F is hermetically welded in 316L stainless steel. This provides superior chemical resistance and allows for the use of hygienic process connections like Tri-Clamp, making it suitable for cleanable environments.
-
Extended Temperature Range: The FDU91F can operate in process temperatures up to 105 °C, allowing it to withstand hotter cleaning cycles or higher-temperature process environments compared to standard PVDF sensors.
-
Non-Contact Time-of-Flight: The sensor calculates level by measuring the time it takes for an ultrasonic pulse to travel to the surface and back. An integrated temperature sensor provides real-time compensation for changes in the speed of sound, ensuring high accuracy even during temperature fluctuations.
-
Self-Cleaning Membrane: The high-frequency vibration of the stainless steel sensor face naturally sheds moisture and prevents dust build-up, ensuring the signal remains clear without the need for manual cleaning.
-
Separate Installation Logic: The sensor is mounted in the process while the transmitter (FMU90/FMU95) is installed in a convenient location up to 300 meters away. This protects the electronics from harsh process conditions and makes commissioning easier.
-
Weatherproof and Flood-Proof: With an IP 68 rating, the sensor is completely protected against water ingress, even if temporarily submerged, which is common in wash-down areas or outdoor flumes.
Matriks Spesifikasi Teknikal
| Ciri | Butiran Teknikal |
| Prinsip Pengukuran | Ultrasonik (Tanpa sentuhan) |
| Bahan Sensor | 316L Stainless Steel (Fully welded) |
| Julat Maks. (Cecair) | 10 m (33 kaki) |
| Julat Maksimum (Pepejal) | 5 m (16 kaki) |
| Jarak Sekatan | 0.3 m (1 ft) |
| Suhu Proses | -40 to +105 °C (-40 to +221 °F) |
| Tekanan Proses | 0.7 to 4 bar (10 to 58 psi) |
| Tahap Perlindungan | IP 68 |
Aplikasi Utama
-
Food and Beverage Storage: Monitoring levels of juices, sauces, or dairy products in large storage tanks where hygienic connections are mandatory.
-
Life Sciences and Biotech: Level measurement in buffer tanks or chemical preparation vessels requiring 316L compatibility.
-
Open Channel Flow in Sanitary Plants: Measuring flow rates in flumes for treated wastewater or process water within food processing facilities.
-
Aggressive Media in Storage: Monitoring acids or alkalis in tanks where a hermetically sealed metal sensor provides better longevity than plastic.
-
Silos with Low Structural Height: Measuring powders or granules in silos where non-contact measurement is preferred to avoid mechanical stress on the vessel roof.
