Technical Characteristics and Tensile Strength
-
Massive Tensile Capacity: The rope and internal mechanics are reinforced to survive downward pull forces up to 60 kN (approx. 6 tons). This is critical in deep silos where the “downdrag” of moving solids creates immense tension on the sensor.
-
Flexible Reach: With a measurement range extending up to 22 meters, the FTI56 can be used for low-level alarms at the very bottom of industrial-scale storage vessels.
-
Static Discharge Protection: High-speed filling of dry solids generates significant static electricity. The FTI56 features a two-stage overvoltage protection system to prevent these discharges from damaging the electronics.
-
Active Build-up Compensation: The advanced capacitance circuitry ensures reliable switching even if the rope is coated with dust or fine particles, focusing only on the “bulk” material level for the switch point.
-
On-Site Adaptability: The rope model is designed to be easily shortened on-site. This allows a single model to be adapted to different silo depths, significantly reducing the need for specialized spare parts inventory.
-
Continuous Monitoring: The device includes automatic self-monitoring of the electronics, ensuring that any internal fault is immediately signaled to the control room, maintaining high plant availability.
مصفوفة المواصفات الفنية
| ميزة | التفاصيل الفنية |
| مبدأ القياس | السعة (على مستوى النقطة) |
| Max. Tensile Load | 60 kN |
| طول المسبار | 500 to 22,000 mm (20 to 866″) |
| درجة حرارة العملية | من -50 إلى +180 درجة مئوية (من -58 إلى +356 درجة فهرنهايت) |
| ضغط العملية | من -1 إلى +25 بار (-14.5 إلى +363 رطل لكل بوصة مربعة) |
| أمان | SIL2 (standard) |
| الناتج | مرحل ثنائي القطب ثنائي الرمية، مرحل ثنائي الأسلاك بتقنية PFM، مرحل ثلاثي الأسلاك بتقنية PNP |
التطبيقات الأساسية
-
Mining and Minerals: High/low level detection for heavy ores, rock, and crushed stone in deep primary crushers or tall storage bins.
-
Cement and Clinker: Monitoring levels in massive raw meal or clinker silos where abrasion and high tension are constant factors.
-
Power Generation: Level control in coal bunkers and fly ash silos where the material can exert significant friction on the rope.
-
Agriculture: Inventory management in tall grain elevators and distribution centers.
-
Inventory Logistics: Combined with Fieldgate technology, the FTI56 provides the “reorder” signals necessary for automated supply chain and material provisioning systems.
