핵심적인 기술적 이점
-
Comprehensive Trim Protection: In the V150S, the valve body, shaft, and bearings are shielded by hard, wear-resistant materials. This full-trim protection ensures that the structural integrity of the valve is not compromised by the abrasive nature of the slurry being controlled.
-
Turbulence Management: The valve features a specially shaped flow ring that guides the throttled stream. This geometry is designed to minimize turbulence and prevent high-velocity fluid from impinging directly on the pipe wall, significantly extending the life of the adjoining pipework.
-
Optimized Reverse Flow Performance: When operated in reverse flow mode, the V150S keeps the high-velocity “vena contracta” (the point of minimum pressure and maximum velocity) within the flow ring bore. This ensures the exit flow is parallel to the wall, dramatically reducing erosion compared to traditional valve styles.
-
Integral One-Piece Casting: The entire valve body, including the flanges, is manufactured from a single casting without any welding. This eliminates potential stress points and leak paths associated with welded joints, providing superior pressure-containing integrity.
-
Simplified Alignment and Installation: The full-flange design allows the valve to be perfectly centered within the pipe flanges. Proper alignment is critical in slurry service; even minor offsets can cause localized turbulence that leads to rapid erosion across the flange faces.
-
Modified Equal Percentage Control: The V-notch ball is precisely contoured to provide a modified equal percentage flow characteristic. This allows for fine-tuned throttling at lower openings while maintaining high-capacity throughput when fully open.
기술 성능 매트릭스
| 기능 | 세부 정보 |
| 밸브 유형 | Flanged V-Notch Ball (Rotary) |
| 건설 | One-piece casting (No welding) |
| 유동 특성 | 수정된 동일 비율 |
| Trim Materials | High-strength, wear-resistant alloys |
| 설치 | Full flanging for easy alignment |
| Specialized Service | Abrasive Slurry and Erosive Media |
주요 응용 분야
-
Mining and Mineral Processing: Controlling tailings, ore slurries, and abrasive thickener underflow.
-
Pulp and Paper: Managing green liquor, white liquor, and high-consistency stock.
-
Chemical Production: Handling catalyst slurries and corrosive/abrasive chemical mixtures.
-
Power Generation: Bottom ash handling and limestone slurry for Flue Gas Desulfurization (FGD).
